TFES-10 – 10 Mil Skived PTFE Film Tape

Description

TFES-10 – 10 Mil Skived PTFE Film Tape

Is a pure skived PTFE with a high temperature silicone adhesive. Used in
electrical applications such as harness/coil wraps & separators,
transformers & slot liners where good insulation & heat resistance
are required.

TFES-10 – 10 Mil Skived PTFE Film Tape

Also used in mechanical applications such as heat sealing bars & jaws,
labeling machine pressure pads, chute liners, anti-friction devices,
bearings, forming dies, aircraft mold release & guide rails where high
temperature, maximum slip and lubricity are required.
High elongation permits tight wrapping; conforms to sharp bends/irregular surfaces.

Meets Spec AA-59474 Type-1, Superseding 23594C Type 1.

  • 36 Yard Rolls
  • Maximum Operating Temperature: 500°F
  • Silicone Adhesive
  • Adhesion: 55 oz/in
  • Break Strength: 60 lb/in
  • Total Thickness: 11.5 Mil
  • Backing Thickness: 10 Mil
  • Dielectric Strength: 20Kv
  • Elongation: 300%
  • 3″ (76.2mm) Plastic Core
  • Available in widths from 1/4″ to 21.5″

Alternative to 3M #5481;Permacel #P421 ; DeWal #204-5; St. Gobain #2255-5 ; Taconic #6115-05;
Lanmar #585-5

TFES-10-10-Mil-Skived-PTFE-Film-Tape

See All of Our High Temperature Tapes

TFES-10-10 Mil-Skive- PTFE-Film-Tape
TFES-10 – 10 Mil Skived PTFE Film Tape

Additional information

Widths/Rolls Per Case

1/4" (6.3mm) = 144
3/8" (9.5mm) = 96
1/2" (12.7mm) = 72
3/4" (19mm) = 48
1" (25.4mm) = 36
1.5" (38.1mm) = 24
2" (50.8mm) = 18
3" (76.2mm) = 12
21.5" (546mm) = LOG