UHMW-20A – 20 Mil Polyethylene Tape

Description

UHMW-20A – 20 Mil Polyethylene Tape

Is a 20 Mil Ultra High Molecular Weight (UHMW) Polyethylene Tape with an
aggressive acrylic adhesive wound on a blue poly liner. Its high
chemical and abrasion resistance and extremely low coefficient of friction
makes this a versatile engineering material for many severe service
applications. Materials slide freely over tape surface with no slip/stick
tendency. High impact strength and shock absorbing properties.

UHMW-20A – 20 Mil Polyethylene Tape

Outwears Teflon™ and is a good replacement when high temperature resistance
is not a requirement. Rub strips on conveyors, bearings and sliding surfaces,
chutes and hopper liners, dead plates, wear pads, guide rails, furniture and
drawer slides.

UHMW-20A – 20 Mil Polyethylene Tape

Used primarily in automotive and mechanical applications. Meets the following
automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M.

  • Film Color: Natural transparent
  • Aggressive Acrylic Adhesive
  • Backing Thickness: 20.0 Mil
  • 18 Yard (16.5M) rolls
  • Peel Adhesion: 60 oz/in (0.669 kg/cm)
  • Tensile Strength: 50 lbs/in (3.515 kg/cm2)
  • Elongation: 300%
  • Maximum Operating Temperature: 300°F (148.9°C)
  • 3″ (7.62cm) plastic core

Alternative to: Dewal #423-20; St. Gobain #2302-20;
Taconic #6311-20; Lanmar #622-20R

See all of our UHMW Polyethylene Tapes

UHMW-20A - 20 Mil Polyethylene Tape
UHMW-20A – 20 Mil Polyethylene Tape

Additional information

Widths and Rolls Per Case:

1/2" (12.5mm) = 72 or 96
3/4" (19mm )= 48 or 64
1" (25mm) = 36 or 48
1.5" (38mm) = 24 or 32
2" (50mm) = 18 or 24
3" (75mm) = 16
4" (100mm) = 12
26.5" (673mm) = 1 LOG