PGD-10 – High Energy Glow In The Dark Tape


PGD-10 – High Energy Glow In The Dark Tape

Is a flexible polyester laminated photoluminescent film coated with a permanent
acrylic pressure-sensitve adhesive and backed with a 5 mil poly coated paper
release liner. The photoluminescent pigments absorb ad store energy from normal,
ambient light. In sudden darkness, the tape is immediately visible. These tapes are a
non electric safety system that easily and inexpensively affixes to walls, handrails,
columns, around door frames, and along stairways and baseboards.

PGD-10 – High Energy Glow In The Dark Tape

Tapes will glow in total darkness after exposure to artificial or natural light – it is
fully charged within 30 minutes. Glows brightest the first 30 minutes after activation
has ceased, but will remain clearly visible in a totally dark room to the night adapted
eye for 10+ hours. These tapes are screen printable. They can also be die-cut and
kiss cut using steel rule dies.
3″ neutral paper cores.

PGD-10 – High Energy Glow In The Dark Tape

Used for identification of critical equipment controls, light switch covers, exit and
directional signage – especially for escape routes and stairways. Tape clearly labels
safety equipment and provides a safe, illuminated path through stairwells, halls,
rooms, and other potentially hazardous areas. Simple and inexpensive to install:
position, peel off backing, and adhere. This safety system requires virtually no

PGD-10 – High Energy Glow In The Dark Tape

Used in hotels, hospitals, schools, public facilities, office buildings and
manufacturing plants – wherever people need a safe, reliable, high and low-level
egress pathway in case of an emergency, such as sudden power outages or the
spread of smoke. Product has excellent resistance to UV light and does not show
significant degradation when used outdoors. Also used for labels, decals, novelties,
sporting goods, trims, special effects, etc.

Physical Properties:PGD-6PGD-10PGD-24PGD-24HDP
ColorLight GreenLight GreenLight GreenLight Green
Adhesive TypeSolvent Based AcrylicSolvent Based AcrylicSolvent Based AcrylicSolvent Based Acrylic
Tape Thickness (+/- 10%)11 mils (excluding liner)11 mils (excluding liner)11 mils (excluding liner)11 mils (excluding liner)
Liner Thickness (+/- 10%)4.5 mils4.5 mils4.5 mils6.0 mils
Adhesion to SST (24 hr dwell)60 oz/in60 oz/in60 oz/in110 oz/in
Min. Application Temp.50°F50°F50°F50°F
UV StabilityExcellentExcellentExcellentExcellent
Glow Properties*6-8 Hours10-15 Hours20-24 Hours20-24 Hours

*Glow Properties (DIN 67510 Xe Lamp; 1000 Lx/5 min): Timespan necessary for afterglow
brightness to diminish to 0.3 mcd/m2 – 100X human eye perception. Duration may vary (+/-)
as several factors (i.e. type/proximity/angle/wattage of light source, conditions of exposure,
etc.) may impact glowing lifespan.

Alternative to Jessup #7530

Available in 50 yard lengths

Product Data Sheet (click to download PDF)

See ALL of our Reflective Tapes


Additional information

50 Yard: Widths / Rolls Per Case

1/2" (12.5mm) = 72
3/4" (19mm) = 48
1" (25mm) = 36
1.5" (38mm) = 24
2" (50mm) = 18
3" (75mm) = 12
4" (100mm) = 8
54" (1372mm) = 1 (LOG)