REF-5DOT – Oralite® (Reflexite®) Retroreflective Tape

Description

REF-5DOT – Oralite® (Reflexite®) Retroreflective Tape

Oralite® (formerly Reflexite®) Conspicuity material is composed of cube corner
(microprism) retroreflective elements integrally bonded to a flexible,
smooth-surfaced, tough and weather resistant UV stabilized polymeric film.
The prism surfaces are coated with a vacuum deposition of aluminum to provide
a mirror surface to the prism facets. The resulting tape is not more than
0.008” thick and comes with an aggressive high-tack pressure-sensitive adhesive.

REF-5DOT – Oralite® (Reflexite®) Retroreflective Tape

Oralite® Visibly BetterTM Retroreflective conspicuity material is a tough weather
and solvent resistant product designed for rugged outdoor use on the sides and
rear of trucks, trailers, automobiles, and emergency vehicles to enhance safety
on the roadway by improving their visibility.

REF-5DOT – Oralite® (Reflexite®) Retroreflective Tape

50 Yard Rolls
NOTE: NHTSA conspicuity regulations
(effective 12/1/93) mandate that all new trailers – 10,000 lbs GVW and 80” wide or
larger, must be reflectorized with alternating red & white retroreflective sheeting
on the sides, bottom of rear door, and ICC bar; and two pieces of white sheeting on
the upper corners of the rear.

Features/Benefits:
  • Durability: 5 Year Warrranty. Withstands brushing off of dirt and grime, and high pressure
    washing. Polyester based film resists cracking & lifting. Will retain reflectivity even after
    impact against loading dock or abrasion by chains.
  • Unique, single-ply construction ensures impact & abrasion resistance
    and easy application.
  • 0.008″ thickness resists dirt accumulation typical of competitor’s thicker (0.025”), open-cell
    construction. Material is extremely thin so there are no raised edges that can catch
    and tear.
  • Unlike competing conspicuity materials, Reflexite® conspicuity material features
    100% adhesion, with no grid lines that can fill with water and cause premature
    adhesive failure.

Specification Compliance:

ASTM D4956ASTM D523
ASTM E810LS300C
FP92 DOT-C2 (applicable to 2” only)
NHTSA 49 CFR, Part 571FMVSS 108

When inquiring about REF-DOT Conspicuity Tape, please specify: 6″/6″ alternating red/white pattern, 111″ (red) / 7″ (white) alternating pattern and a solid roll or kiss cut.

Product Data Sheet (click to download PDF)

See ALL of our Reflective Tapes

REF-5DOT-Oralite®-Reflexite®-Retroreflective-Tape

REF-5DOT-Oralite®-Reflexite®-Retroreflective-Tape

Additional information

Widths / Rolls Per Case

1" (25mm) = 36
1.5" (38mm) = 24
2" (50mm) = 18
3" (75mm) = 12
4" (100mm) = 12
6" (150mm) = 8
30" (762mm) = 1 (LOG)